Forum Post: about winning prize
Ive won first five entries in this competition but till now Ive not received any prize or any call from efy people if i call efy people they disconnect my call .this competition is totally fraud
View ArticleForum Post: RE: about winning prize
efy isnt linked with this contest anymore. contact renesas official Shwetha shweta.baid.yb@renesas.com
View ArticleForum Post: RE: Stack Analysis and Debugging
Does this exception occur when debugging an application after programming the flash? If so, it may be caused by a bug in the debugger that sets the stack pointer to the value in the last image that...
View ArticleForum Post: M32C R5F64525KFD Error No 17502: Received error response
Hello, i have problems to connect on an R5F64525KFD what i can do?, the connections are correct FDT API initialised: version 4, 09, 02, 000 FCF Settings Applied: R5F64525, (C:\Program...
View ArticleForum Post: RE: stdarg.h not on the include path in e2 Studio 4.1.0.018
I tried this just now and it worked for me. Try creating a new blinky project and placing the include line at the top of hal_entry.c file.
View ArticleForum Post: RE: Second Server on the Ethernet port
I posted the file in the Files section of this group.
View ArticleForum Post: RE: Synergy Power Consumption Calculator
No we do not currently have a calculator available. But we think it is a good idea and would be useful so we are considering it. Thanks for the suggestion.
View ArticleForum Post: RE: Meaning of Trace View columns
Hi, So let’s stay with the time stamp. We have an external oscillator 12 MHz (XTAL). It gets multiplied (on the board somehow - I am not really a hardware engineer – by some PLL circuit I am told) to...
View ArticleForum Post: RE: M32C R5F64525KFD Error No 17502: Received error response
R5F64525KFD is NOT a M32C. This is a R32C/152. The error message is typical for a device that has not been switched to flash programming mode. Please check the signal levels on P50 (pin 65, "H"), P55...
View ArticleForum Post: RE: Meaning of Trace View columns
A performance counter is an on-chip counter on RX63x dedicated to performance measurements. The resolution is ICLK, means 10.87ns at 82MHz. There are several possible problems with your measurement....
View ArticleForum Post: RE: M30855FWUGP Read/Write when locked and code not known
I suppose when you say the device is locked you mean that the ID code has been programmed and you cannot reprogram the device. Using E8a as debugger to erase the device will not help because on...
View ArticleForum Post: RE: M30855FWUGP Read/Write when locked and code not known
hmmm, thanks, yes the flash lock is on. Pity. I'm not sure if parallel is on or off, which particular one would you try/buy?
View ArticleForum Post: g_uart UART Driver on r_sci_uart: Requires Asynchronous Mode mode...
Creating a new project that uses the UART I have this message. I am using e2 Studio V4.0.0.15 and ssp V 1.0.0 What should I add?
View ArticleForum Post: RE: M30855FWUGP Read/Write when locked and code not known
How many processors do you have to re-program? I would recommend to switch to a new and empty processor. I have a Elnec programmer and a Sunny Giken programmer (only available outside Europe). Both...
View ArticleForum Post: RE: g_uart UART Driver on r_sci_uart: Requires Asynchronous Mode...
I found a simple solution. Select "Sci Common" and "Property"
View ArticleForum Post: RE: Welcome to Synergy Forum
One way to provide feedback is to make suggestions for new application notes you would like to see. You could even win a Synergy Kit! renesasrulz.com/.../5975.aspx And don't miss out on the new...
View ArticleForum Post: RE: New Blog Post: Getting Oriented with Synergy Xplorer
Xplorer provides an excellent overview on the Synergy Platform. To see the advantages of using the Synergy Platform first hand, consider purchasing a kit to create your own design in record time. Find...
View Article