Comment on GR-SAKURA Sketch Environment V2.06 for e2studio(V4)
Dear all. I'm having problems building this version of Sketch. I do get 13 warnings like: Description Resource Path Location Type Invalid project path: Include path not found...
View ArticleForum Post: RZ/A1L RSCAN0RMNB NRXMB range
Hi, in the RZ/A1L manual R01UH0437EJ0200 Rev.2.00 May 25, 2015 1. on page 952 the register RSCAN0RMNB is described. It says about NRXMB: Set a value of 0 to 31. The maximum value is 16 x(number of...
View ArticleForum Post: RE: Driving 5-mux LCDs with RL78 LCD controller
As per my experience it is looking possible with using Eight-time-slice mode and 1/4 Bias Method. You must use the pins of COM5,6,7 as open specially. Its effect in contrast and legibility depends on...
View ArticleForum Post: RZ/A1L number allocatable FIFO buffers
Hi, in the RZ/A1L manual RZ/A1L R01UH0437EJ0200 Rev.2.00 May 25, 2015 1. on page 905 the number of allocatable buffers is described: Receive FIFO buffer: 8 FIFO buffers (up to 96 buffers allocatable...
View ArticleForum Post: RZ/A1L RSCAN sample
Hi, the only sample for RSCAN I have found so far is an_r01an2511eg0100_rza1h_rsk/Workspace/RSK+RZA1_E2/RZ_A1H_CAN_RS Is there a more sophisticated example available which uses e.g.interrupt handlers?
View ArticleForum Post: ISR in CTC mode
hello sir, how to write an ISR in CTC (clear timer on compare) mode for KAEDE like in ARDUINO ?
View ArticleForum Post: RE: Company registration
hjw- I will try and track it down assuming the company name you registered is the same as your email address...
View ArticleForum Post: RE: Company registration
hjw- I'm told a 'bunch' of companies were approved this AM. Can you check again and let me know if you still don't have access?
View ArticleForum Post: RE: USB Host Template/Example
Where is the example of the the USB Mass Storage located? Thanks.
View ArticleForum Post: Where can I download GR-Kaede Library (.lbr) for EAGLE CAD? I am...
I am using Eagle to draw schematics.
View ArticleForum Post: USB Composite HID and Audio Class
Please let me know where I can get the USB Composite HID and Audio Class
View ArticleForum Post: RL78G12 P60 as Output
Hi, In a new RL78G12 design project, I have P60 set to be an output with an initial value of 1. Since this is an open drain output, I have a pull-up externally to 3.3V and the signal is driving an...
View ArticleForum Post: RE: Company registration
Just got an email that the company has been registered. So yes, everything's ok now. Thanks very much.
View ArticleForum Post: RZ/A1 ETHER samples
Hi, I have not found any samples for the Ethernet controller of RZ/A1H or RZ/A1L in Application Notes and Sample Code http://www.renesas.eu/products/mpumcu/rz/rza/Application_Notes.jsp Are there any...
View ArticleForum Post: RZ fail to execute MI command
after the modification linker (.ld) file i'm getting error on debug. Processor: RZ/A1H Linker modification : change RAM address from 0x20020000 to 0x60020000. accordingly i have change stack base...
View ArticleFile: Demo: Qt and DirectFB on RZA1 RSK (XIP Linux)
XIP Linux QT and DirectFB Demos for the RZ/A1 RSK Board Information: The Linux kernel and File System are both Execute in Place (XIP) resulting in less RAM being used. This demonstration does not make...
View ArticleForum Post: RE: RZ/A1 ETHER samples
Unfortunately, there is no Renesas owned Ethernet sample code for the RZ/A1. However, there are multiple Ethernet and TCP/IP stacks offered by RTOS and software vendors such as Express Logic and...
View ArticleForum Post: Issue with Ethernet println..
Hi All, Working on a project in which I need to make GR board to send values to a platform. For the same I am using Ethernet library. But there seems to be some problem with it. Following is the...
View ArticleForum Post: RE: Issue with Ethernet println..
Additionally, when I am compiling the same code in Arduino IDE it is getting compiled without any error. The error is only coming when I am compiling it on Online compiler.
View Article