Forum Post: RE: Error while running code in IAR embedded workshop
This thread will be archived due to inactivity Mike Clements RenesasRulz Moderator
View ArticleForum Post: RE: e2studio Debug Configuration: Image Path always replaced with...
This thread will be archived due to inactivity Mike Clements RenesasRulz Moderator
View ArticleForum Post: RE: troubleshoot the program
This thread will be archived due to inactivity Mike Clements RenesasRulz Moderator
View ArticleForum Post: RE: RXC Compiler #pragma inline_asm option
Thanks for the reply.. Can you send me a link to the RXC Manual you are referencing because the one I downloaded didn't have a reference to inline_asm on page 332 I am assuming you are saying that the...
View ArticleForum Post: RE: DK-S7G2 Bluetooth LE module reset
Hi, The problems with the module have been fixed. It turned out I was sending data to the module in a way that doesn't match the specifications. Thank you for your help! Dennis
View ArticleForum Post: Required Support on WDG driver
Hello, We are using RH850-F1x (R7F7010403 -64pin) for our Autosar project. We have requirements to configure WDG driver. The WDG driver is configured tried testing with below test application but it...
View ArticleForum Post: RE: Need help in Hardware issues
Check out the Dev boards schematic documentation.renesas.com/.../r20ut1140xj0100_qbr5f104pj_je.pdf
View ArticleForum Post: Renesas Flash Programmer 2.05.03 (S19, S28, S37) ?
Hi friends, I have a problem, I can't understand what format of the file accepts what program Renesas Flash Programmer 2.05.03 ( S19, S28, S37)? from them precisely is suitable for me, I have a bin...
View ArticleForum Post: Booting from serial flash
Hello! I don't understand, how to boot from serial flash memory? Must i write my own bootloader and flash it in internal ROM or what ? Must i use CFI compliant flash?
View ArticleForum Post: RE: Renesas Flash Programmer 2.05.03 (S19, S28, S37) ?
For programming an RX64M, a Motorola Hex File with following Record Fields is supported: S0, S3, S7.
View ArticleForum Post: RE: Renesas Flash Programmer 2.05.03 (S19, S28, S37) ?
architect thank you for the answer, that is turns out the Renesas Flash Programmer program 2.05.03 works with these formats (S0, S3, S7)? My microcontroller from the RX210 (R5F52105ADFM) series, and I...
View ArticleForum Post: RE: Renesas Flash Programmer 2.05.03 (S19, S28, S37) ?
My converter generates only S0, S3 and S7, and it works (even for addresses which were originally defined as S2-Record-Fields) with Renesas Flash Programmer 2.05.01 without any problems.
View ArticleForum Post: RE: Renesas Flash Programmer 2.05.03 (S19, S28, S37) ?
architect thank you for the answer, and you couldn't will share the convector what I could transform the bin file and on tried to write down it, thanks I will be very grateful to you. My e-mail...
View ArticleForum Post: RE: Booting from serial flash
If you are using an RZ/A device, it does not have internal ROM. But, when booting from external serial flash, it will execute the code directly in the serial flash, so you just need to download your...
View ArticleForum Post: RE: Renesas Flash Programmer 2.05.03 (S19, S28, S37) ?
Unfortunaltely, my converter is not for the public. It is merely a C# class with a few useful functions, like injection/changing of bytes, removal/merging of areas, loading/storing to disk. But you...
View ArticleForum Post: RE: RXC Compiler #pragma inline_asm option
Sorry, version 1,01 of CC-X User Manual, doc R20UT3248EJ0101 Page 332 It will be in the Start Menu under Renesas Compilers when you install the tool Sample Syntax on that page. #pragma inline_asm func...
View ArticleForum Post: RE: TCP socket Connect() request fail with NX_IP_ADDRESS_ERROR(0x21)
Supreet, The IP address you are using is a private IP address and cannot be used for external access. This is why you are getting the IP address error. For more please see...
View ArticleForum Post: RE: Renesas Flash Programmer 2.05.03 (S19, S28, S37) ?
Not sure what tools you are using, but most of the tool-chains will output an SREC, even if it a post-build process. All of the Renesas tools will do it. See Stype selection in linker output dialog...
View ArticleForum Post: RE: Renesas Flash Programmer 2.05.03 (S19, S28, S37) ?
architect thank you, I on try that be not to think up.
View ArticleForum Post: RE: Renesas Flash Programmer 2.05.03 (S19, S28, S37) ?
Kevin you couldn't show me it where exactly. Thanks.
View Article