Forum Post: RE: Problem booting linux-3.14 on custom board
Hello, Thanks for your reply Chris. You were right, it was related to the devicetree. Do you have any ideas why the kernel is stuck like this because of the devicetree ? I mean there is no relevant...
View ArticleForum Post: RE: Problem booting linux-3.14 on custom board
Honestly, the first time I ran into this, I spent hours tracking it down going line by line during the kernel init code (because I thought it was XIP Linux related) until I finally figured it out, and...
View ArticleForum Post: How to connect RL78 / G13 (R5F100FG) UART?
Hi, as I can read RL78/G13 (R5F100FG) on UART ? I need the scheme how I can correctly will be connected to the microcontroller on RS232? what conclusion I should use on the microcontroller? I was...
View ArticleForum Post: Renesas E1 debuggar
Hi friends. .......I have problem to self check the product E1. When I check "the E1/E2 self check has failed" and STATUS 1103 error massege display......so please help me to solve this problem and...
View ArticleForum Post: How to add such D78F0123H microcontroller a series (78K0/KD1)
Hi, I can not find the program list Renesas Flash Programmer 2.05.03 D78F0123H this microcontroller series (78K0 / KD1), how can it then add a list of programs, such D78F0123H microcontroller series...
View ArticleForum Post: RE: RH850 application code load from boot loader
Hello Pradeep, Are you trying to jump to the application code directly after flashing, or are you saying it won't run the application after a reset? Thanks, Scott
View ArticleForum Post: Programing of 64F2638F20V
I have a Elnec BEEPROG+ universal programmer and want to progam IC part no:64F2638F20V from H8S/2638 family by Renesas ,is it possible to do so,if yes then can anyone provide the circuit diagram or...
View ArticleForum Post: RE: USBX Throughput Expectations
MCU speed, 240Mhz, USBFS as a Device. Device Class Storage class. Basically connecting to windows, waiting for the device to show up as a mass storage device, then W/R tests from/to (copy/paste). On...
View ArticleForum Post: RE: USBX Throughput Expectations
MCU speed, 240Mhz, USBFS as a Device. Device Class Storage class. Rich
View ArticleForum Post: multiple ioport_pin_cfg_t generated
With SSP1.1.0 generating pinconfiguration for my template BSP i get 2 sets pinconfig structures in pin_data.c. The first one with the defautl values, the second with my pin configuration values....
View ArticleForum Post: RE: How to use GR Kaede with IoT?
This thread will be archived due to inactivity Mike Clements RenesasRulz Moderator
View ArticleForum Post: RE: Debugger,IDE and Compiler selection for SH7269
FrankL is correct. URL for SH7269 Renesas SW: am.renesas.com/.../soft_tools_index.jsp In addition, SH core is supported by 3rd party tool chains if you choose to go down that path (GCC, etc.). You...
View ArticleForum Post: Generate .hex, .jlink for standalone run
How can I go about creating a standalone build for download to the Development Platforms (S7DK board)? I see a .jlink created as part of my project, but when comparing it to one of the canned .jlink...
View ArticleForum Post: RE: RX111
This thread will be archived due to inactivity Mike Clements RenesasRulz Moderator
View ArticleForum Post: RE: Adding TraceX to Project causes "fatal error: 'tx_thread.h'...
Hallo Karol, thanks, yes I've seen that all the components still used the alpha version although I've chosen SSP 1.1.0 in BSP tab, but anyway I've added successfully TraceX to my new initially SSP...
View ArticleForum Post: bsp_qspi.c is getting generated when not selected
With my template BSP : (SSP1.1.0 , generated from s7g2_sk) i deselected the r_qspi component. I removed the bsp_qspi.c and h files. After rebuild these files are back again. (and with a million...
View ArticleForum Post: RE: Adding TraceX to Project causes "fatal error: 'tx_thread.h'...
Hallo Karol, CAN problem seemed to be solved, my very last idea - just after sending my last post - was that it could be a HW problem. And fortunately I've got a second SK and with this one, Rx works...
View ArticleForum Post: RE: Capacitive Touch Slider on SK-S7G2
Hi Jim, Workbench6 for Synergy will be available on the Synergy Gallery by end of this week.
View ArticleForum Post: RE: Need information about BRK Exception in RX111
This thread will be archived due to inactivity Mike Clements RenesasRulz Moderator
View Article
