Thank for the reply Frank.....Actually I am not using the segmented type LCD (A LCD with Digits)....I am using a normal 7 segment display (4 digit display) which has 8 segment lines and digit select line to select the particular digit.

But it is a LCD? Then it should work. Connect the SEG outputs to the display segment lines and the COM lines to the digit select lines.

I believe on the F1L the FCL can be used to write this area. Are you running into difficulties?

Simon, Have you found the answers you were looking for? Mike Clements RenesasRulz Moderator

Niki, Have you found a library that works for you? Mike Clements RenesasRulz Moderator

Prashant, Did you get your 7 segment display working? Mike Clements RenesasRulz Moderator

Saisharan, Are you disabling interrupts before you start your ISR? Mike Clements RenesasRulz Moderator

Yes Frank, I thought in same manner . I connect segment output to Segments of display and common signal for the disgit selection. But it is not working. Can u provide me information about how to configure the LCD driver of RL/78 for the purpose to drive 7segment display( I mean to say configuration of LCD driver).

shllu, Is your problem resolved? Mike Clements RenesasRulz Moderator

Raghavendra, Have you resolved your issue? Mike Clements RenesasRulz Moderator

This thread will be archived due to inactivity Mike Clements RenesasRulz Moderator

I am not disabling interrupts. can you please elaborate

This thread will be archived due to inactivity Mike Clements RenesasRulz Moderator

GanaBappa, Have you resolved your issue? Mike Clements RenesasRulz Moderator

TLHQ, Is your list scrolling propperly now? Mike Clements RenesasRulz Moderator

Minh, Is your ISR functioning properly? Mike Clements RenesasRulz Moderator

Hi, We need to use https for our application using a GSM module, which use UART interface we have developed the code for the same on RX63, how do we port in synergy via Netx? Or is it better to use the code as such without using SSP/Netx Frameworks? Thanks, John Neona Embedded Labs

Forum Post: RE: Is it possible to use LCD controller /driver to drive the 7 segment display?

Forum Post: RE: Is it possible to use LCD controller /driver to drive the 7 segment display?

Forum Post: RE: RH850F1L Flash memory

Forum Post: RE: Rx64M Simple SPI examples

Forum Post: RE: fft library for RX63T uC

Forum Post: RE: Is it possible to use LCD controller /driver to drive the 7 segment display?

Forum Post: RE: RL78/G14 ADC

Forum Post: RE: Is it possible to use LCD controller /driver to drive the 7 segment display?

Forum Post: RE: RL78/G13 R5F100ACA FDL problem

Forum Post: RE: RBLE Health Thermometer Profile Enabling problem

Forum Post: RE: RL78/F13 (R5F10BBG) : SPI Master not working with external Flash

Forum Post: RE: Enter low power

Forum Post: RE: RL78/G14 Host Sample with G1D

Forum Post: RE: RL78/G14 ADC

Forum Post: RE: μPD78F0730 serial port driver for Linux

Forum Post: RE: Application doesn't work on S5D9 when flashed using J-Flash

Forum Post: RE: GUIX Scrollbar and Lists

Forum Post: RE: Smart Card Interface for PK S5D9

Forum Post: Https implementation using GSM/GPRS module

Forum Post: RE: Is it possible to use LCD controller /driver to drive the 7 segment display?