Forum Post: RE: Memory management for Bootloader and application
1. Yes, both boot loader and application need 0x400 byte vector table. So you should find the same entry also in the map file for the application. If you have a project that has been generated by...
View ArticleBlog Post: R7F701414 need documentation
Hiller Dudley I am supporting a high volume of Renesas devices. I need documentation for device R7F701414, but your web site does not acknowledge that this device exists. I suspect it is a member of...
View ArticleForum Post: RE: SD card using S7 DK/SK
There is a bug in SSP v1.1.0 when trying to use SD/MMC channel 1 (it works fine with SD/MMC channel 0) that causes the fx_media_open() function to return FX_IO_ERROR. I don't know if you are using...
View ArticleForum Post: RE: SD card using S7 DK/SK
I Use the SDcard on channel 1 with ssp 1.1.1. with FileX on my own hardware. I had exactly the same problem as Wanjing. I could trace the problem into the driver , reading the card detect line....
View ArticleForum Post: How to disable all interrupts for RX100 family?
Hi there, Please help me to know how to disable/enable all interrupts for RX100 family? Thanks.
View ArticleForum Post: Difference between the reset sources for RX100 family
Hi there, For RX100 family there are several reset sources like RES# pin, soft reset, LVD, IWDT etc. I would like to know what differs between those reset sources? eg: pin reset and soft reset results...
View ArticleBlog Post: Reducing the Total Ownership Cost
Embedded software development is becoming exponentially expensive! Twenty years ago a developer using a simple 8-bit microcontroller needed to get a few interrupts up and running, a few peripherals...
View ArticleForum Post: Code Generator windows display incorrectly
I just upgraded to the latest version of e2Studio and found that the code generator forms are rendered with the controls overlapping. Does anyone else have this problem?
View ArticleForum Post: RE: Code Generator windows display incorrectly
Can you define what you mean by controls overlapping? Maybe it's a window or tab positioning issue? If you drag the tabs around, can you see the code generator windows better? A screenshot here would...
View ArticleForum Post: RE: Project dependent on another project; Does not build properly
Just curious, On the Project menu, you have the Build Automatically option checked on the projects that are dependent?
View ArticleForum Post: RE: Unhandled event loop exception ( E2studio code generator )
Hello. I tried this function and it worked with no issue. My Java version differs from yours however. I'm using build 1.8.0_101-b13. Maybe try an update to the latest Java and it might correct the...
View ArticleForum Post: RE: Project dependent on another project; Does not build properly
Aha! I did NOT have that option checked on one of the sub-projects. Thank you!
View ArticleForum Post: RE: Code Generator windows display incorrectly
I have tried every manner of opening the windows. Maximized, restored, in different panes, using the Code Generator Perspective. I also tried every screen resolution my monitors support. The check box...
View ArticleForum Post: RE: Crypto APIs crash when called
Fatih, Can you please elaborate as to what functionality is available via. the SCE Crypto Engine? I see the VSAs listing the SCE as part of their solutions, therefore I assume much of the framework...
View ArticleForum Post: RE: Crypto APIs crash when called
Fatih, Can you please elaborate as to what functionality is available via. the SCE Crypto Engine? I see the VSAs listing the SCE as part of their solutions, therefore I assume much of the framework...
View ArticleForum Post: RE: Crypto APIs crash when called
Rich, A summary of supported Crypto feature can be found in the Section 11 of the SSP Datasheet (R01DS0272EU0111). Here is the link: synergygallery.renesas.com/.../r01ds0272eu0111_synergy_ssp.pdf A...
View ArticleForum Post: RE: NX SNTP nx_sntp_client_receiving_updates
Hi Tim, So Im not sure whats going on and where Im going wrong. Worst part is that I got to the point of using your code directly and still struggling. Im not seeing the callback getting executed....
View ArticleForum Post: Use the RSCAN module of rx231
There are some problems when we try to use MCU rx231 to develop a module of CANopen. The API for the RSCAN driver for the RX231 download from the RENESAS official web. When transimission using...
View ArticleForum Post: RE: SD card using S7 DK/SK
Thanks. Jeff. I used Channel 0 alse face the same error. May I know if there is any demo program from renesas which is working? Thanks. Regards, Wanjing
View ArticleForum Post: RE: SD card using S7 DK/SK
hello, Dig: Thank you very much for confirming this problem. I still face the same error after I change it to embed mode. I am still looking into it. Regards, Wanjing
View Article