Hello Wasim, Have a look at the following timer configuration ("Mode" is the key setting): After opening your timer, you can adjust the blink rate using g_timer.p_api- periodSet(g_timer.p_ctrl, period_time , period_units ); i.e. period_time = 500 and period_units = TIMER_UNIT_PERIOD_MSEC for 500 millisecond periods. The time ON is adjusted using g_timer.p_api- dutyCycleSet(g_timer.p_ctrl, duty_time , duty_units , output_pin ); where duty_time = 20 and duty_untis = TIMER_PWM_UNIT_PERCENT for 20% time on (i.e. 100ms). Output_pin = 0 for GTIOCA and 1 for GTIOCB. Regards
↧