Matt, complete debugger output would be helpful in this case. Otherwise, please have a look at the project I'm posting below. Bill, I actually happened to be putting a similar project together not so long ago. I amended few bits here and there so it's more understandable. IP of the board translates onto root directory on the USB drive. LED1 indicates USBX status: blink = no device, on = device found. LED2 is used for NetX status: on = server is running, off = server is disabled. When either one of them turns red, an error occurred in one's thread. Here's the project for DK-S7: (Please visit the site to view this file) And here are few files you can put in the root dir of your USB device for a neat demo (plain HTML): (Please visit the site to view this file) Regards
↧