Maybe the problems explained in this thread are not related to the memory stick brand or model. I tested the USBX MSD (Host) demo with the SK-S7G2 board and found that after some insertions/removals (usualy from 4 to 9) of the USB stick, the program was stuck in the Default_Handler() function due to a Hardware Fault exception. Now I have the PE-HMI1 board and just downloaded the latest version of the demo, and the problem is exactly the same with one memory stick (after a few insertions/removals of the memory stick the program hangs), and with other memory sticks, after some insertion/removals it does not hang but it no longer detects any memory stick, not the one I was experimenting nor any other (I'm testing with four of them of different brands, all of them problem free under Windows). I'm developing an application that, in some cases, will need frequent insertion and removal of a memory stick so, please, can somebody from the Synergy team clarify if you can reproduce this problem or if you need more information? Thanks.
↧