Having a little trouble understanding the clock setup for the g_uart UART Driver on r_sci_uart. The default is setup with Internal Clock Source but with this setup I have only been able to get 9600, 19200, and 38400 baud rated to work properly. Higher than that and I get output but it is garbled. I really need to get baud rates up to 230kbaud. I am guessing that there is something I am misunderstanding about how to the setup the clocks to support 57600, 115200 and 230400 baud rates. Has anyone been successful setting up these baud rates for the SK-S7G2 starter kit J7 connector (SCI3 UART)?
↧